Takeuchi TL8 Compact Track Loader: The Takeuchi TL8CTL replaces the TL230 Series 2. It weighs approximately 8,345 pounds and has a tip weight of 6,020.
The TL8 compact, track loader is powered by a turbocharged Kubota engine of 74.3 horsepower. It meets Tier 4-Final emission standards and has a high-pressure common rail injection system, DOC, and DPF. Double-reduction planetary drives offer traction forces exceeding 9,100 pounds.
Takeuchi’s compact track loader TL8 has bucket breakout forces of over 6,800 pounds and loader lifting arm forces greater than 6,700 pounds.
A 15.7-inch track, which reduces ground pressure to 4.4 PSI, is standard on the Takeuchi TL8 compact track loader.
The TL8’s rated operating capacity has increased by more than 13 percent to 2,105 pounds. You can increase it by adding optional rear counterweights by up to 10 percent.
Takeuchi TL8 Price
2016 TAKEUCHI TL8: USD $49,784
Takeuchi TL8 Compact Track Loader Features
ENGINE |
|---|
| EPA Final Tier 4 Emission Compliant |
| Turbocharged |
| DOC+DPF Exhaust After Treatment |
| Active Power Control Power Management System |
| Working Modes – Power and ECO |
| Automatic Fuel Bleed System |
| High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame |
| Dual Element Air Filter, with Pre-Cleaner |
ELECTRICAL |
| Multi-Informational Display |
| Sealed Rocker Switches |
| 12 volt System with 60 amp Alternator |
| Halogen Work Lights, Front and Rear |
| Engine Preheat |
| Hour Meter |
| Back-up Alarm |
| Horn |
UNDERCARRIAGE AND FRAME |
| Permanently Sealed Track Rollers with Metal Face Seals |
| Fully Welded Frame with Integrated Cross Members |
| Front and Rear Tie-Down and Lift Points |
| 2 Speed Travel |
| 15.7″ Rubber Track with Integrated Steel Cables and Forged Steel Inserts |
| 12.6″ Rubber Track with Integrated Steel Cables and Forged Steel Inserts (optional) |
OPERATOR’S STATION |
| Tilt-up Operator’s Station |
| Deluxe High Back Adjustable Suspension Seat |
| Rear Pivoting Seat Bar with Integrated Arm Rest |
| ROPS / FOPS Structure |
| Retractable 2″ Seat Belt |
| Retractable 3″ Seat Belt (optional) |
| 3 Point Retractable Seat Belt (optional) |
| Pressurized Cab with Roll-up Door, A/C, Heat, Defrost, and Front Wiper (optional) |
| AM/FM/MP3 Radio with NOAA Weatherband (optional) |
| Polycarbonate Door (High Flow Only) |
HYDRAULIC & WORKING EQUIPMENT |
| Cushioned Boom Cylinders |
| Boom Float with Detent |
| Hydraulic Pilot Controls |
| Proportional Auxiliary Controls with Detent |
| Pressure-Relieving Flat-Faced Coupler Body |
| 14-Pin Connector with Push Button Control |
| Hydraulic Self Leveling |
| Mechanical Quick Coupler |
| Hydraulic Quick Coupler – Cab – Standard Equipment |
| Hydraulic Quick Coupler – Canopy – optional |
| Primary Flow Auxiliary Hydraulics 18.4 gpm |
| High Flow Auxiliary Hydraulics 33 gpm (optional Cab Only) |
| Pattern Change Valve (ISO or H) (optional) |
Takeuchi TL8 Compact Track Loader Specification
OPERATING PERFORMANCE |
||
|---|---|---|
| Operating Weight – Canopy | 8,455 lb | (3,835 kg) |
| Operating Weight – Cab | 8,631 lb | (3,915 kg) |
| Tipping Load | 6,020 lb | (2,731 kg) |
| Rated Operating Capacity, SAE J818* | 2,105 lb | (955 kg) |
| ROC w/ Optional Counter Weight | 2,323 lb | (1,054 kg) |
| Operating Load at 50% of Tipping Load | 3,010 lb | (1,365 kg) |
| Bucket Breakout Force | 6,856 lb | (3,110 kg) |
| Lift Arm Breakout Force | 6,709 lb | (3,100 kg) |
| Traction Force | 9,127 lb | (4,140 kg) |
| Ground Pressure – 15.7″ Track | 4.4 psi | (30.2 kPa) |
| Ground Pressure – 12.6″ Track | 5.4 psi | (37.2 kPa) |
| Travel Speed – Low | 4.6 mph | (7.4 km/hr) |
| Travel Speed – High | 6.8 mph | (11.0 km/hr) |
HYDRAULIC SYSTEM |
||
| Auxiliary Flow – Primary Circuit | 18.4 gpm | (69.5 Lpm) |
| Auxiliary Flow – High Flow (optional) | 33.0 gpm | (124.9 Lpm) |
| Hydraulic System Pressure | 3,046 psi | (21.0 MPa) |
ENGINE |
||
| Make / Model | Kubota / V3307-CR-Turbo | |
| Engine Displacement | 203 cu in | (3.3 L) |
| Horsepower @ 2,600 rpm | 74.3 hp | (55.4 kW) |
| Maximum Torque @ 1,500 rpm | 192 ft-lb | (260 Nm) |
FLUID CAPACITIES |
||
| Engine Lubrication | 11.2 qt | (11.8 L) |
| Cooling System | 14.8 qt | (14.0 L) |
| Fuel Tank Capacity | 19.8 gal | (75.0 L) |
| Fuel Consumption (65% of Full Load) | 2.69 gal/hr | (10.2 L /hr) |
| Hydraulic Reservoir Capacity | 10.36 gal | (39.0 L) |
| Hydraulic System Capacity | 15.3 gal | (58.0 L) |
Dimension
MACHINE DIMENSIONS |
||
|---|---|---|
| Max. Lift Height to Bucket Pin | 9 ft 11 in | (3,030 mm) |
| Mid-Height Reach | 4 ft 6.3 in | (1,412 mm) |
| Overall Operating Height | 12 ft 9.7 in | (3,905 mm) |
| Dump Height Fully Raised | 7 ft 9.0 in | (2,370 mm) |
| Dump Reach Fully Raised | 2 ft 4.7 in | (730 mm) |
| Dump Angle | 38.5° | |
| Rollback Angle | 30° | |
| Track Ground Contact Length | 4 ft 6.7 in | (1,390 mm) |
| Machine Length | 8 ft 11.8 in | (2,740 mm) |
| Transport Length | 11 ft 3.0 in | (3,400 mm) |
| Transport Height | 6 ft 11.9 in | (2,130 mm) |
| Departure Angle | 30° | |
| Clearance Circle with Bucket | 6 ft 10.0 in | (2,080 mm) |
| Clearance Circle without Bucket | 4 ft 6.0 in | (1,375 mm) |
| Clearance Circle Rear | 5 ft 2.4 in | (1,585 mm) |
| Track Width | 15.7 in | (400 mm) |
| Ground Clearance | 12.1 in | (310 mm) |
| Overall Width without Bucket | 5 ft 5.4 in | (1,660 mm) |
Takeuchi tl8 Reviews
The Takeuchi TL8 is a small tracked loader that people trust for its dependability, versatility, and performance. It’s a common choice in different industries like construction, landscaping, and agriculture.
For more details check out the YouTube video
Takeuchi tl8 Weight
Takeuchi TL8 Compact Track Loader Operating Weight – Canopy 8,455 lb and Operating Weight – Cab 8,631 lb.
Takeuchi tl8 Problems
Hydraulic Issues
TL8 hydraulic system troubles are widespread. TL8 hydraulics power loader functions. Hydraulic system problems slow or stop machines. TL8 hydraulic failure symptoms include slow track operation and weak auxiliary functions. Low hydraulic fluid is a typical cause of hydraulic issues.
If adding hydraulic fluid doesn’t fix anything, the hydraulic pump or line may be blocked. Experts must diagnose and solve any issue.
Gets Stuck in Muddy Surfaces
Most track loaders struggle in muddy circumstances, including the TL8. Track loaders cannot use some terrains. Mud stands out. Mud can trap the TL8. Even if it doesn’t get stuck, muddiness will slow the TL8.
Given track loaders’ construction, this problem cannot be solved. You can only be careful or avoid deep muddy regions where you operate.
Parts Are Expensive & Difficulty Finding Replacement Parts
Takeuchi makes compact track loaders with high-quality parts. Thus, replacing a damaged TL8 part is expensive, especially compared to competitors’ offerings. However, third-party aftermarket parts can fix this. TL8 authentic Takeuchi components will function better. Takeuchi creates and tests high-performance machine components.
The TL8, like many of its siblings’ track loaders, is sturdy, although replacing parts can be expensive. Comparing component prices between dealers, internet, and local stores can save money.
Doors Get Heavy
With regular use, the TL8’s doors can become heavier and stuck. As the screws loosen with use, poor TL8 maintenance will cause this. If the door is stuck, try shaking it. Check the TL8’s door screws. Screwdrivers can tighten loose screws.
A certified track loader mechanic can prevent these and other faults by servicing the TL8 periodically. Early detection means faster fixes. As mentioned, replacing the door or its mechanism can be costly.
Final Words
I think it should be enough information for you to buy or sell this tractor. If you have any queries regarding this Takeuchi TL8 Compact Track Loader article, then please comment below in the comment box, and if you like it so, please share it with your friends.
Thanks for visiting our site and stay tuned with me for more new Takeuchi Compact Track Loader information like this.
Takeuchi tl8 FAQ
How much horsepower is a Takeuchi TL8?
Takeuchi TL8 Compact Track Loader engine produces a 74.3 hp
How much can a Takeuchi TL8 lift?
Takeuchi’s TL8 compact track loader is capable of lifting loads exceeding 6,800 lbs and bucket breakout forces exceeding 6,800 lbs. A 15.7-inch track, which reduces flotation, is standard on the Takeuchi TL8 compact track loader.
Is a Takeuchi TL8 high flow?
According to the company, this loader is capable of handling a variety of applications. The machine’s standard hydraulic flow is 19.1 gallons/minute. offers a high flow option that can deliver 33.8 gallons/minute at 3,045 PSI.
What is the difference between Takeuchi TL8 and TL8R2?
Engine emissions differentiate the Takeuchi TL8 and TL8R2 compact track loaders. TL8 and TL8R2 engines are Tier 4 Final and Tier 4, respectively.
The TL8’s Tier 4 Final engine is more advanced and fulfills higher emission rules, which may improve fuel efficiency and emissions.
The TL8R2’s new cab improves visibility, comfort, and maintenance access. The TL8R2 has a standard rearview camera and a redesigned hydraulic fast coupler.
What type of engine does the Takeuchi TL8 Compact Track Loader have?
The Takeuchi TL8 Compact Track Loader features a Tier 4 Final Yanmar 4TNV98C engine with 74 hp.
What is the rated operating capacity of the Takeuchi TL8 Compact Track Loader?
The Takeuchi TL8 Compact Track Loader has a rated operating capacity of 2,105 lbs.
What attachments are compatible with the Takeuchi TL8 Compact Track Loader?
The Takeuchi TL8 Compact Track Loader is compatible with a wide range of attachments, including buckets, forks, grapples, augers, and more.