McCormick X2 Series STD / GE Compact Tractors Price, Specs, Review, Overview
The McCormick X2 Series are compact nimble tractors best for smooth manoeuvring in tight spots. The hood and cab roof has been totally redesigned with a modern look matching the new McCormick family styling.
The McCormick X2 Series Tractors come in 2 models: STD with the GE only available in platform version and choice of either cab or platform.
On the McCormick X2 Series Compact Tractor GE model, the design of the front axle and rear final drives provides the driving position to be lowered by 95 mm as correlated to the STD version, this results in better performance in tight and low spaces such as overhead trellis vineyards and greenhouses.
McCormick X2 Series Compact Tractors are designed with 24-inch rear tires, It has a minimum overall width of 1254 mm and a steering wheel height of only 1218 mm, making them perfect compact Tractors.
So if you have no idea about the McCormick X2 Series Compact Tractors price list, technical parts specifications, and Key features, then you have been placed at the perfect place, cause here you can get everything that you need to know about the McCormick X2 Series Compact Tractors. Ok, let’s check out each single model information below.
You May Also Like To Check:
- Big bud 747 prices in India
- JCB price maharashtra
- Mahindra commercial vehicles price list
- Yamaha xmax 125 price in India
- JCB price in India 2024 on-road price
McCormick X2 Series Compact Tractors Advantages
- Yanmar 4-cylinder naturally aspirated and turbocharged engines
- Hood and cab roof design
- Matching the new McCormick family styling
- Two models – std and ge. Ge model with driving position lowered by 95 mm
- Front hitch and PTO available as an option
- 12/12 speed transmission with the optional creeper
- Synchro shuttle lever adjacent to the steering wheel
- Cab with all-round visibility for the std version
- Driving position with fully adjustable steering wheel and seat
McCormick X2.20 Compact Tractor
McCormick X2.20 Tractor Price
Please, friends, contact us as your Nearest Tractor Dealer
McCormick X2.20 Tractor Quick Facts
- Engine: 4TNV84-KLAN Yanmar Direct-Injection Engine Tier 3
- Maximum power(ISO): 44 Hp
- Rated Speed: 2800 rpm
- Fuel Tank Capacity: 40 Liters
- Transmission: Basic Transmission + Synchro Shuttle 12 Forward + 12 Reverse (30 Km/H) Standard
- PTO: 1 speed 540 rpm (Without ground speed PTO) Standard
- Net PTO Power: 40 Hp
- Brakes: Mechanical Control Standard
- Lifting capacity: 1200 kg
McCormick X2.20 Tractor Specification
ENGINE |
|
YANMAR DIRECT-INJECTION ENGINE TIER3 | 4TNV84-KLAN |
MAX. POWER (ISO) | 44 hp /32 kw |
RATED SPEED | 2800 rpm |
MAX. TORQUE | 129 nm |
MAX. TORQUE-SPEED | 1400 rpm |
BORE/STROKE | 84X90 mm |
DISPLACEMENT / CYLINDERS / VALVES | 1995 / 4 / 8 CM3 |
COMPRESSION RATIO | 19:1 |
WATER COOLING | Standard |
AIR FILTER | DRY |
FUEL TANK CAPACITY | 40 Liters |
TRANSMISSION |
|
BASIC TRANSMISSION+ SYNCHRO SHUTTLE 12FWD+12REV (30 KM/H) | Standard |
BASIC TRANSMISSION+CREEPER+ SYNCHRO SHUTTLE 16FWD+16REV | Option |
POWER TAKE-OFF |
|
MECHANICAL ENGAGEMENT | Standard |
1 SPEED 540 RPM (WITHOUT GROUND SPEED PTO) | Standard |
2 SPEEDS 540/750 RPM | Option |
1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES | Standard |
GROUND SPEED PTO ONLY WITH TWO-SPEED PTO | Option |
NET PTO POWER (ISO) | 40 hp / 29 Kw |
FRONT PTO |
|
MECHANICAL ENGAGEMENT | Option |
1 SPEED 1000 RPM | Option |
1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES | Option |
4WD FRONT AXLE |
|
MECHANICAL ENGAGEMENT | Standard |
MAX. STEERING ANGLE | 55° |
TWIN-LOCK ELECTROHYDRAULIC DIFF-LOCKS | Standard |
CLUTCH |
|
INDEPENDENT DRY DUAL-CLUTCH | 9 IN (228 MM) |
MECHANICAL ENGAGEMENT | Standard |
BRAKES |
|
MECHANICAL CONTROL | Standard |
WET DISC REAR BRAKES, 6 DISCS | Standard |
HYDRAULIC POWER LIFT |
|
DRAFT AND POSITION CONTROL FUNCTIONS | Standard |
MECHANICALLY OPERATED | Standard |
LIFTING CAPACITY | 1200 KG |
MAX. OPERATING PRESSURE | 180 Bar |
TOTAL HYDRAULIC FLOW (POWER LIFT+ STEERING) | 28 + 19.7 L/MIN |
THREE-POINT LINKAGE | CAT. 1 |
REAR REMOTE VALVES | 2 Standard / 3 Option |
FRONT POWER LIFT |
|
MECHANICALLY OPERATED | Option |
LIFTING CAPACITY | 400 kg Option |
THREE-POINT LINKAGE | CAT. 1 Option |
CAB AND DRIVING POSITION |
|
X2 SERIES CAB / RADIO FITTING FACILITY | NO FOPS option / FOPS option |
HEATING / VENTILATION | option |
AIR-CONDITIONING | option |
OPENING REAR AND FRONT WINDSCREENS | option |
REAR WIPER | option |
ANALOG INSTRUMENTS | Standard |
SPRUNG SEAT | Standard |
ISO-MOUNTED PLATFORM | Standard |
DIMENSIONS AND WEIGHTS WITH STANDARD TYRES |
|
FRONT TYRES | 260/70R16 | 240/70R16 |
REAR TYRES | 320/70R24 | 320/70R24 |
A – HEIGHT TO SAFETY FRAME mm | 2097 | 2003 |
A – HEIGHT OVER CAB mm | 2307 | NA |
B – WHEELBASE 4WD mm | 1760 |
C – TOTAL LENGTH WITH BALLAST WEIGHTS mm | 3225 |
D – GROUND CLEARANCE mm | 385 | 295 |
E – MIN. WIDTH mm | 1383 | 1254 |
F – HEIGHT TO STEERING WHEEL mm | 1312 | 1218 |
G – FRONT TRACK ADJUSTMENT mm | 1083 – 1314 |
H – REAR TRACK ADJUSTMENT mm | 872 – 1258 |
TOTAL WEIGHT WITHOUT BALLAST (120 KG) 4WD (+CAB ONLY FOR STD MODEL 150 KG) | 1460 kg |
McCormick X2.30 Compact Tractor
McCormick X2.30 Tractor Price
Please, friends, contact us as your Nearest Tractor Dealer
McCormick X2.30 Tractor Quick Facts
- Engine: 4TNV88-KLAN Yanmar Direct-Injection Engine Tier 3
- Maximum power(ISO): 47.5 Hp
- Rated Speed: 2800 rpm
- Fuel Tank Capacity: 40 Liters
- Transmission: Basic Transmission + Synchro Shuttle 12 Forward + 12 Reverse (30 Km/H) Standard
- PTO: 1 speed 540 rpm (Without ground speed PTO) Standard
- Net PTO Power: 43 Hp
- Brakes: Mechanical Control Standard
- Lifting capacity: 1200 kg
McCormick X2.30 Tractor Specification
ENGINE |
|
YANMAR DIRECT-INJECTION ENGINE TIER3 | 4TNV88-KLAN |
MAX. POWER (ISO) | 47.5 hp /35 kw |
RATED SPEED | 2800 rpm |
MAX. TORQUE | 141 nm |
MAX. TORQUE-SPEED | 1200 rpm |
BORE/STROKE | 88X90 mm |
DISPLACEMENT / CYLINDERS / VALVES | 2189 / 4 / 8 CM3 |
COMPRESSION RATIO | 19:1 |
WATER COOLING | Standard |
AIR FILTER | DRY |
FUEL TANK CAPACITY | 40 Litres |
TRANSMISSION |
|
BASIC TRANSMISSION+ SYNCHRO SHUTTLE 12FWD+12REV (30 KM/H) | Standard |
BASIC TRANSMISSION+CREEPER+ SYNCHRO SHUTTLE 16FWD+16REV | Option |
POWER TAKE-OFF |
|
MECHANICAL ENGAGEMENT | Standard |
1 SPEED 540 RPM (WITHOUT GROUND SPEED PTO) | Standard |
2 SPEEDS 540/750 RPM | Option |
1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES | Standard |
GROUND SPEED PTO ONLY WITH TWO-SPEED PTO | Option |
NET PTO POWER (ISO) | 43 hp / 32 Kw |
FRONT PTO |
|
MECHANICAL ENGAGEMENT | Option |
1 SPEED 1000 RPM | Option |
1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES | Option |
4WD FRONT AXLE |
|
MECHANICAL ENGAGEMENT | Standard |
MAX. STEERING ANGLE | 55° |
TWIN-LOCK ELECTROHYDRAULIC DIFF-LOCKS | Standard |
CLUTCH |
|
INDEPENDENT DRY DUAL-CLUTCH | 9 IN (228 MM) |
MECHANICAL ENGAGEMENT | Standard |
BRAKES |
|
MECHANICAL CONTROL | Standard |
WET DISC REAR BRAKES, 6 DISCS | Standard |
HYDRAULIC POWER LIFT |
|
DRAFT AND POSITION CONTROL FUNCTIONS | Standard |
MECHANICALLY OPERATED | Standard |
LIFTING CAPACITY | 1200 KG |
MAX. OPERATING PRESSURE | 180 Bar |
TOTAL HYDRAULIC FLOW (POWER LIFT+ STEERING) | 28 + 19.7 L/MIN |
THREE-POINT LINKAGE | CAT. 1 |
REAR REMOTE VALVES | 2 Standard / 3 Option |
FRONT POWER LIFT |
|
MECHANICALLY OPERATED | Option |
LIFTING CAPACITY | 400 kg Option |
THREE-POINT LINKAGE | CAT. 1 Option |
CAB AND DRIVING POSITION |
|
X2 SERIES CAB / RADIO FITTING FACILITY | NO FOPS option / FOPS option |
HEATING / VENTILATION | option |
AIR-CONDITIONING | option |
OPENING REAR AND FRONT WINDSCREENS | option |
REAR WIPER | option |
ANALOG INSTRUMENTS | Standard |
SPRUNG SEAT | Standard |
ISO-MOUNTED PLATFORM | Standard |
DIMENSIONS AND WEIGHTS WITH STANDARD TYRES |
|
FRONT TYRES | 260/70R16 | 240/70R16 |
REAR TYRES | 320/70R24 | 320/70R24 |
A – HEIGHT TO SAFETY FRAME | 2097 | 2003 |
A – HEIGHT OVER CAB MM | 2307 | NA |
B – WHEELBASE 4WD MM | 1760 |
C – TOTAL LENGTH WITH BALLAST WEIGHTS MM | 3225 |
D – GROUND CLEARANCE MM | 385 | 295 |
E – MIN. WIDTH MM | 1383 | 1254 |
F – HEIGHT TO STEERING WHEEL MM | 1312 | 1218 |
G – FRONT TRACK ADJUSTMENT MM | 1083 – 1314 |
H – REAR TRACK ADJUSTMENT MM | 872 – 1258 |
TOTAL WEIGHT WITHOUT BALLAST (120 KG) 4WD (+CAB ONLY FOR STD MODEL 150 KG) | 1460 kg |
McCormick X2.40 Compact Tractor
McCormick X2.40 Tractor Price
Please, friends, contact us as your Nearest Tractor Dealer
McCormick X2.40 Tractor Quick Facts
- Engine: 4TNV84T-2XLAN Yanmar Direct-Injection Engine Tier 3
- Maximum power(ISO): 54.2 Hp
- Rated Speed: 2800 rpm
- Fuel Tank Capacity: 40 Litres
- Transmission: Basic Transmission + Synchro Shuttle 12 Forward + 12 Reverse (30 Km/H) Standard
- PTO: 1 speed 540 rpm (Without ground speed PTO) Standard
- Net PTO Power: 50,7 Hp
- Brakes: Mechanical Control Standard
- Lifting capacity: 1200 kg
McCormick X2.40 Tractor Specification
ENGINE |
|
YANMAR DIRECT-INJECTION ENGINE TIER3 | 4TNV84T-2XLAN |
MAX. POWER (ISO) | 54.2 hp /39.9 kW |
RATED SPEED | 2800 rpm |
MAX. TORQUE | 159,5 nm |
MAX. TORQUE-SPEED | 1200 rpm |
BORE/STROKE | 84X90 mm |
DISPLACEMENT / CYLINDERS / VALVES | 1995 /4 TURBO /16 cm 3 |
COMPRESSION RATIO | 18.9:1 |
WATER COOLING | Standard |
AIR FILTER | DRY |
FUEL TANK CAPACITY | 40 Litres |
TRANSMISSION |
|
BASIC TRANSMISSION+ SYNCHRO SHUTTLE 12FWD+12REV (30 KM/H) | Standard |
BASIC TRANSMISSION+CREEPER+ SYNCHRO SHUTTLE 16FWD+16REV | Option |
POWER TAKE-OFF |
|
MECHANICAL ENGAGEMENT | Standard |
1 SPEED 540 RPM (WITHOUT GROUND SPEED PTO) | Standard |
2 SPEEDS 540/750 RPM | Option |
1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES | Standard |
GROUND SPEED PTO ONLY WITH TWO-SPEED PTO | Option |
NET PTO POWER (ISO) | 50,7 hp / 37,3 Kw |
FRONT PTO |
|
MECHANICAL ENGAGEMENT | Option |
1 SPEED 1000 RPM | Option |
1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES | Option |
4WD FRONT AXLE |
|
MECHANICAL ENGAGEMENT | Standard |
MAX. STEERING ANGLE | 55° |
TWIN-LOCK ELECTROHYDRAULIC DIFF-LOCKS | Standard |
CLUTCH |
|
INDEPENDENT DRY DUAL-CLUTCH | 9 IN (228 MM) |
MECHANICAL ENGAGEMENT | Standard |
BRAKES |
|
MECHANICAL CONTROL | Standard |
WET DISC REAR BRAKES, 6 DISCS | Standard |
HYDRAULIC POWER LIFT |
|
DRAFT AND POSITION CONTROL FUNCTIONS | Standard |
MECHANICALLY OPERATED | Standard |
LIFTING CAPACITY | 1200 KG |
MAX. OPERATING PRESSURE | 180 Bar |
TOTAL HYDRAULIC FLOW (POWER LIFT+ STEERING) | 28 + 19.7 L/MIN |
THREE-POINT LINKAGE | CAT. 1 |
REAR REMOTE VALVES | 2 Standard / 3 Option |
FRONT POWER LIFT |
|
MECHANICALLY OPERATED | Option |
LIFTING CAPACITY | 400 kg Option |
THREE-POINT LINKAGE | CAT. 1 Option |
CAB AND DRIVING POSITION |
|
X2 SERIES CAB / RADIO FITTING FACILITY | NO FOPS option / FOPS option |
HEATING / VENTILATION | option |
AIR-CONDITIONING | option |
OPENING REAR AND FRONT WINDSCREENS | option |
REAR WIPER | option |
ANALOG INSTRUMENTS | Standard |
SPRUNG SEAT | Standard |
ISO-MOUNTED PLATFORM | Standard |
DIMENSIONS AND WEIGHTS WITH STANDARD TYRES |
|
FRONT TYRES | 260/70R16 | 240/70R16 |
REAR TYRES | 320/70R24 | 320/70R24 |
A – HEIGHT TO SAFETY FRAME | 2097 | 2003 |
A – HEIGHT OVER CAB MM | 2307 | NA |
B – WHEELBASE 4WD MM | 1760 |
C – TOTAL LENGTH WITH BALLAST WEIGHTS MM | 3225 |
D – GROUND CLEARANCE MM | 385 | 295 |
E – MIN. WIDTH MM | 1383 | 1254 |
F – HEIGHT TO STEERING WHEEL MM | 1312 | 1218 |
G – FRONT TRACK ADJUSTMENT MM | 1083 – 1314 |
H – REAR TRACK ADJUSTMENT MM | 872 – 1258 |
TOTAL WEIGHT WITHOUT BALLAST (120 KG) 4WD (+CAB ONLY FOR STD MODEL 150 KG) | 1460 kg |
Conclusion
I think it should be enough information to buy or sell this McCormick X2 Series Tractors, but if you have any questions about this post then please comment for us, and we will try to solve your problem as soon as possible. Thank’s. Visit our Website at Commercialvehicleinfo.com for additional Details.