Kubota b6100 Specification, Horsepower, Oil Capacity, Weight, Prices & Overview
“Looking up the Kubota B6100 will provide you access to a wealth of data, such as the product’s selling price, specifications, user ratings, and weight and dimensions. This data has been verified by our team with many Kubota workers and representatives “.
Find Kubota B6100 Prices, specifications, and reviews easily. Finding full information from several sources Is laborious. To save you time and effort, we have assembled all the required information.So, without further ado, let’s get to the main topic.
Kubota B6100 Tractor Price
Kubota B6100 Original Price: $5,400 USD
Kubota B6100 Horsepower
Kubota B6100 is producing 14 horsepower (16.4 kilowatts).
Kubota B6100 Oil capacity & Oil Type
The Kubota oil type recommended Mobil SAE 10w- 30, SAE 20, SAE 20, And Oil capacity is – 4.1 qts 3.9 L.
Kubota B6100 Weight
The Kubota b6100 tractor model weighs 970 lbs or 439 kg.
Kubota b6100 Lift Capacity
The Kubota b6100 lift capacity is 400 lbs 181 kg
Kubota b6100 Top Speed
The Kubota b6100 top speed is 13.8 kph (8.6 mph)
Kubota B6100 Specs
Engine
| Engine Model | Kubota D650-A |
| Engine Type | 4-cycle vertical three-cylinder liquid-cooled diesel |
| Number of Cylinders | 3 |
| Displacement, cu.in (L) | 41.2 (0.675) |
| Engine Bore, in (mm) | 2.52 (64.0) |
| Engine Stroke, in (mm) | 2.76 (70.0) |
| Aspiration | Naturally aspirated |
| Rated Engine Power, hp (kW) | 14.3 (10.6) |
| Rated Engine Speed, rpm | 2800 |
| Maximum Torque, Nm (lb-ft) | 36.5 (27.1) |
| Torque Speed, rpm | 1800 |
| Idle Speed, rpm | 800 |
| Compression Ratio | 22:1 |
| Firing Order | 1-2-3 |
| Fuel System | Injection pump |
| Lubrication System | Forced lubrication by pump |
| Cooling System | Forced circulation with water pump |
| Fuel Tank Capacity, gal (L) | 3.4 (13.0) |
| Oil Capacity, qts (L) | 4.1 (3.9) |
| Coolant Capacity, qts (L) | 4.9 (4.6) |
| Electrical System Rating, Volts | 12 |
Power Take Off
| PTO Operational Type | Transmission |
| PTO Horsepower, hp (kW) | 12.0 (8.9) |
| PTO Speed (Gear), rpm | 514/876/1500 |
| PTO / Engine Speed, rpm | 514/2800 |
| PTO / Engine Speed, rpm | 876/2800 |
| PTO / Engine Speed, rpm | 1500/2800 |
| PTO Speed (HST), rpm | 540/850 |
| PTO / Engine Speed, rpm | 540/2800 |
| PTO / Engine Speed, rpm | 850/2800 |
Standard Transmission
| Transmission Type | Unsynchronized gear |
| Gearbox Type | 6F/2R, gear shift |
| Number of Forward Gears | 6 |
| Number of Reverse Gears | 2 |
| Clutch Type | Dry single plate |
| Oil Capacity, qts (L) | 12.2 (11.5) |
| Maximum Forward Speed, mph (kph) | 8.6 (13.8) |
| Maximum Reverse Speed, mph (kph) | 4.3 (6.9) |
Optional Transmission
| Transmission Type | Hydrostatic (HST), high-low gear shift |
| Number of Forward Gears | Infinite (2-range) |
| Number of Reverse Gears | Infinite (2-range) |
| Clutch Type | Dry single plate |
| Oil Capacity, qts (L) | 14.2 (13.4) |
| Maximum Forward Speed (Low), mph (kph) | 3.5 (5.6) |
| Maximum Forward Speed (High), mph (kph) | 9.1 (14.5) |
| Maximum Reverse Speed (Low), mph (kph) | 2.4 (3.9) |
| Maximum Reverse Speed (High), mph (kph) | 6.2 (10.1) |
Wheels And Tires
| Drive Wheels | 2WD/4WD |
| Steering Configuration | Front steer |
| Steering System | Manual, ball screw type |
| Brake Type (Gear) | Differential mechanical shoe |
| Brake Type (HST) | Mechanical internal-expanding |
| Front Tire Size (2WD) | 4.00×9 |
| Rear Tire Size (2WD) | 7.00×16 |
| Front Tire Size (4WD) | 6.00×12 |
| Rear Tire Size (4WD) | 8.00×16 |
| Front Tire Size (Turf) | 20×8.00-10 |
| Rear Tire Size (Turf) | 27×8.50-15 |
| Front Tread (2WD), in (mm) | 27.4 (690) |
| Front Tread (4WD), in (mm) | 30.9 (780) |
| Front Tread (2WD HST), in (mm) | 30.3 (760) |
| Front Tread (4WD HST), in (mm) | 28.8 (720) |
| Rear Tread (2WD), in (mm) | 25.6-27.5 (650-700) |
| Rear Tread (4WD), in (mm) | 25.2-29.1 (640-740) |
Dimensions And Weight
| Wheelbase (2WD), in (mm) | 48.9 (1240) |
| Wheelbase (4WD), in (mm) | 49.1 (1245) |
| Wheelbase (2WD HST), in (mm) | 54.7 (1380) |
| Wheelbase (4WD HST), in (mm) | 55.1 (1390) |
| Length, in (mm) | 76.6 (1940) |
| Length (HST), in (mm) | 83.8 (2120) |
| Height (2WD), in (mm) | 44.9 (1140) |
| Height (4WD), in (mm) | 44.6 (1130) |
| Height (HST), in (mm) | 46.9 (1190) |
| Overall Width (2WD), in (mm) | 36.6 (920) |
| Overall Width (4WD), in (mm) | 38.4 (970) |
| Overall Width (HST), in (mm) | 38.6 (980) |
| Ground Clearance (2WD), in (mm) | 9.8 (240) |
| Ground Clearance (4WD), in (mm) | 9.5 (235) |
| Ground Clearance (4WD HST), in (mm) | 9.4 (230) |
| Weight (2WD), lb (kg) | 970 (440) |
| Weight (4WD), lb (kg) | 1036 (470) |
| Weight (2WD HST), lb (kg) | 1151 (520) |
| Weight (4WD HST), lb (kg) | 1265 (575) |
Kubota B6100 Review
The Kubota B6100 is a compact utility tractor that was manufactured from 1978 to 1984. It is equipped with a 15.5 horsepower three-cylinder diesel engine and features a three-point hitch and a 12 horsepower mid-PTO. This tractor is highly regarded for its reliability, durability, and versatility.
Its compact size and power make it an excellent choice for a wide range of tasks, such as landscaping, gardening, and light construction.
For more details check out the video
Kubota b6100 Attachments
Kubota B219 Loader |
|
| Loader weight: | 390 lbs 176 kg * |
| Height (to pin): | 73.5 inches 186 cm |
| Clearance, dumped bucket: | 55.75 inches 141 cm |
| Dump reach: | 22 inches 55 cm |
| Dump angle: | 38° |
| Lift to full height (at pin): | 500 lbs 226 kg |
| Bucket width: | 38 inches 96 cm |
| 48 inches 121 cm |
|
Kubota B1630 Loader |
|
| Height (to pin): | 69.2 inches 175 cm |
| Clearance, dumped bucket: | 54.1 inches 137 cm |
| Dump reach: | 20.9 inches 53 cm |
| Dump angle: | 39° |
| Reach the ground: | 46.9 inches 119 cm |
| Breakout force (lift): | 950 lbs 430 kg |
| Lift to full height (at pin): | 580 lbs 263 kg |
| Bucket width: | 42 inches 106 cm |
| 48 inches 121 cm |
|
| 54 inches 137 cm |
|
Kubota B6100 Problems
Engine Troubleshooting
The engine won’t start or is hard to start
- Because the gasoline filter is dusty, clean the filter element.
- Closed fuel cock: Open the fuel on-off cock to inject fuel.
- If air is leaking from your gasoline lines, tighten the clamps and repair any damaged pipes.
- Injectors for fuel are damaged or blocked. If necessary, inspect the fuel injectors and replace them.
- Repair or replace the fuel injection pump if it breaks down.
- engine compression problems? Replace any damaged components if found.
Diesel shuts off during operation
- Because the gasoline filter is dusty, clean the filter element.
- Closed fuel cock: Open the fuel on-off cock to inject fuel.
- If air is leaking from your gasoline lines, tighten the clamps and repair any damaged pipes.
- Injectors for fuel are damaged or blocked. If necessary, inspect the fuel injectors and replace them.
- Repair or replace the fuel injection pump if it breaks down.
- engine compression problems? Replace any damaged components if found.
The engine stops after starting
- Incorrectly adjusted timing of the fuel injection pump – Check and fix changes
- The fuel filter is dirty; replace the filter element.
- Nozzles on fuel injectors are clogged or broken – Switch out or clean the injector nozzles.
- Incorrect fuel injection pump – Fix the fuel pump or put in a new one.
- Dirty air cleaner element?
Electrical System Troubleshooting
The battery cannot be charged
- The battery is dead, so change it.
- Damaged battery wiring harness: Check the wiring for damage and fix or replace it if necessary.
- The battery terminals and wires are corroded or loose. – Tighten terminals and cables or clean them.
- The belt is broken or the tension isn’t set right. Replace the belt or set the tension correctly.
Starter turns slowly
- Low battery power? Charge it up.
- The battery is going down quickly. – Fix the battery charging system or get a new one
- Bad battery cable harness: Check the cables for problems, fix them, or get new ones.
- Cables and terminals that are loose or rusty – Fix or tighten the cables and terminals on the battery.
Transmission Troubleshooting
Hard shifts
- Misaligned or broken clutch—The clutch needs to be fixed or replaced.
- Gear shift connection that has been damaged or is loose – Service or replaces linkage shift
- Shift forks are damaged or worn; replace the shift forks.
- Bad parts in the mechanism for shifting gears – Replace bad parts
Lack of transmission oil pressure
- The fluid is at a low level. If more is required, check the transmission fluid level and add it.
- It is necessary to replace or clean the dirty oil filter for the gearbox.
- changing a broken relief valve
Transmission makes excessive noise
- Bearings that are cracked or worn need to be replaced.
- Not enough fluid in the transmission—Add transmission fluid as needed
- The transmission oil is dirty and needs to be changed.
- Broken gears or the wrong backlash – Either fix the backlash or change the gears.
- Shift forks are broken or worn out. Replace broken or worn-out shift forks.
Hydrostatic Transmission Troubleshooting
HST transmission is excessively noisy
- Transmission oil is dirty or there isn’t enough of it. Change the oil or add enough to get to the right level.
- Damaged or uncorrected speed-control rod linkage – Repair or modify link rod linkage
- The relief valve is broken; replace it.
- Overloading the transmission: The load should be lowered
- Transmission parts are worn or broken. After taking the transmission apart and checking it, replace worn parts.
Transmission oil overheated
- Transmission doesn’t have enough oil – Check the level of oil in the transmission and add oil as needed
- Filter element clogged with transmission fluid – replace or clean the filter
- Cooling parts are plugged or broken. Check all cooling parts and replace or fix them as needed.
- Too much load on the transmission—Lessen the load on the transmission
Low power
- Transmission doesn’t have enough oil – Checking the oil level in the transmission and adding more if needed
- Test charge pressure is lower than low charge pressure.
- The relief valve is old or broken—Replace the relief valve as needed
Hydraulics Troubleshooting
Hydraulic system overheating
- The pressure in the hydraulic system isn’t set right. This needs to be fixed.
- Main relief valve that is broken or not set up right—Adjusts or replace the relief valve
- Contamination of hydraulic oil—Change the oil
- Check the suction line, fittings, and pump seals if there is air in the hydraulic system.
Conclusion
That’s all there is To know about the Kubota B6100 Tractor’s Price, Specs, Review, and Key Features; nevertheless, If you have any questions about this topic, kindly put them in the comment section below We will respond to your inquiry as soon as we can.
Kubota B6100 FAQ
How much horsepower does a Kubota B6100 have?
Kubota B6100 is producing 14 horsepower (16.4 kilowatts).
How much oil does a Kubota B6100 hold?
Kubota B6100 oil capacity is 4.1 qts 3.9 L