If you’re looking for the John Deere 3010 price, specs, reviews, weight, and features you’ve come to the right place Our team has confirmed this information with several John Deere representatives and associates.
Let’s discuss the John Deere 3010 Spec, price, specifications, And reviews. finding complete Information On the internet can be challenging. Therefore, We prefer that you save your precious energy And time.
To make your search simpler our staff has prepared comprehensive and step-by-step information about the John Deere 3010 pricing, specifications, reviews, weight, and features. So Without further ado let’s get To the meat of the matter.
About John Deere 3010
John Deere 3010 is a brand new generation series tractor, preceding JD 2010. John Deere manufactured this tractor between 1961 and 1963 at its manufacturing plant located in Waterloo, Iowa, USA. In total, 44,000 tractor units were produced in just three years.
JD 3010 is a combination of the garden tractor as well as industrial tractor models. Four models are available of the garden tractor, which are row-crop, utility, standard, and orchard.
The single model that is industrial is the wheel model.
For instance, the row crop comes with more clearance from the ground than the other models. This lets it work on garden chores such as until hard dirt is smashed.
John Deere 3010 Price
Model | Hours | Price |
---|---|---|
1961 John Deere 3010 | 2000 | $6,500 |
1962 John Deere 3010 | 1800 | $7,000 |
1963 John Deere 3010 | 1000 | $8,000 |
John Deere 3010 Oil Capacity
Oil capacity: 8 qts 7.6 L
John Deere 3010 Serial Number
1961 | 1000 |
1962 | 19801 |
1963 | 32400 |
Final | 46952 |
John Deere 3010 Specs
General Specifications |
|
Model | John Deere 3010 |
Length | 3,517 mm (138.5 in) |
Width | – |
Height | – |
Wheelbase | 2,280 mm (90.0 in) |
Weight | 2,950 kg (6,503 lbs) |
Fuel tank capacity | Gas/diesel: 110.0 liters (29.0 US gal.; 24.2 Imp. gal) LP-gas: 94.6 liters (25.0 US gal, 20.8 Imp. gal) |
Battery | 12V, 75 Ah one for Gas/LP and two for Diesel |
Cabin type | Open operator station |
Gasoline Engine |
|
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Gasoline |
Displacement | 3.3 L, 3,294 cm2, (201.0 cu·in) |
Bore and stroke | 102.0 mm X 102.0 mm (4.02 in X 4.02 in) |
Compression ratio | 7.5:1 |
Horsepower | 56.4 PS (41.5 KW; 55.7 HP) |
Starter | Electric |
Oil capacity | 7.6 liters (8.0 US.qts, 6.7 Imp. qts) |
Coolant capacity: | 15.2 L (16.0 US. qt, 13.4 Imp. qt.) |
Intake valve clearance | 0.38 mm (0.015 in) |
Exhaust valve clearance | 0.70 mm (0.028 in) |
LPG Engine |
|
Model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | LPG |
Displacement | 3.3 L, 3,294 cm2, (201.0 cu·in) |
Bore and stroke | 102.0 mm X 102.0 mm (4.02 in X 4.02 in) |
Compression ratio | 9.0:1 |
Horsepower | 56.2 PS (41.3 KW; 55.4 HP) |
Starter | Electric |
Oil capacity | 7.6 liters (8.0 US.qts, 6.7 Imp. qts) |
Coolant capacity: | 15.2 L (16.0 US. qt, 13.4 Imp. qt.) |
Intake valve clearance | 0.38 mm (0.015 in) |
Exhaust valve clearance | 0.70 mm (0.028 in) |
Diesel Engine |
|
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 4.2 L, 4,162 cm2, (254.0 cu·in) |
Bore and stroke | 105.0 mm X 121.0 mm (4.13 in X 4.76 in) |
Compression ratio | 16.5:1 |
Horsepower | 60.8 PS (44.7 KW; 59.9 HP) |
Starter | Electric |
Oil capacity | 7.6 liters (8.0 US.qts, 6.7 Imp. qts) |
Coolant capacity: | 15.2 L (16.0 US. qt, 13.4 Imp. qt.) |
Intake valve clearance | 0.46 mm (0.018 in) |
Exhaust valve clearance | 0.46 mm (0.018 in) |
Transmission and chassis |
|
Chassis | 4×2 2WD |
Steering type | Power |
Brakes | Differential hydraulic wet disc |
Transmission model | John Deere Syncro-Range |
Transmission type | Partially synchronized with dry disc clutch |
Gears | 8 forward and 3 reverse |
Speed | Forward: 23.3 kmh (14.5 mph) Reverse: 13.7 (8.5 mph) |
Three-Point Hitch |
|
Caterogy | II |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) |
|
Rear PTO type | Independent |
Rear PTO spped | 540, 1,000 rpm |
Hydraulic system |
|
Hydraulic type | Closed center |
Hydraulic capacity | 36.0 L (38.04 US. qt, 31.68 Imp. qt.) |
Pressure | 2250 psi (155.1 bar) |
Valves | 2 |
John Deere 3010 Problems
Issues | Short Solutions |
Engine Problems | If the filter gets clogged and dirty, clean it out or replace it. In the event of fuel injection being blocked or damaged, nozzles need to be checked and repaired. |
Issues with Transmission | When the level of fluid inside the housing of the transmission is low, fill it with fluid.When the transmission fluid leaks replace or clean the tube that returns to it. |
Hydraulic System Problems | Refill the hydraulic fluid, and use the appropriate kind of oil. |
Problems with Steering | To repair the malfunctioning component, you can purchase a replacement steering pump. Replace the front tires when you notice signs of wear uneven. |
Electrical Issues | Make sure to tighten or repair any damaged or loose wiring connections. |
John Deere 3010 Years Made
The John Deere 3010 was among the first tractors of the New Generation series. The tractor was a huge commercial success, with around 30000 units manufactured between 1961 and 1963. The 3010 has a rating of 50 plus horsepower.
Conclusion
This thorough manual covers every feature of the John Deere 3010, Such as its Price, details, evaluations, Attachments, and Features. You will fully Comprehend this tractor type and its potential after Reading this.
But, If you have any queries concerning this Article, Please Express them in the Comments section below. I’ll try my best to assist you as quickly as possible. Thank’s. Visit our Website at Commercialvehicleinfo.com for additional Details.