John Deere 2520 Specs, Horsepower, Weight, Oil Capacity, Price & Review
If you’re looking for John Deere 2520 price, specs, reviews, weight, and features, you’ve come to the right place. Our team has confirmed this information with several John Deere representatives and associates.
Let’s talk about John Deere 2520 price, its price, and specifications, and John Deere 2520 reviews.
Finding complete information on the internet can be challenging. Therefore, we prefer that you save your precious energy and time. To make your search easier, our team has compiled complete and step-by-step information on John Deere 2520 price, specs, reviews, weight, and features.
So, without further ado, let’s get to the main topic.
Also Check
- John deere d130 price
- John deere d140 price
- John deere d105 price
- John deere 6250r price in india
- John deere 1025r specs
About John Deere 2520
The John Deere 2520 is a compact utility tractor with four-wheel drive from the series 2000 Twenty. From 2006 to 2012, this tractor was made by John Deere in Augusta, Georgia, in the United States.
The John Deere 2520 utility tractor has a 1.3 L diesel engine with three cylinders and a hydrostatic transmission with infinite forward and reverse gears and two ranges.
The Yanmar 3TNV82A engine was in the John Deere 2520 small utility tractor. It is a 1.3 L, 1,331 cm2, (81.2 cuin), three-cylinder diesel engine with natural aspiration.
The Cylinder bore is 3.23 inches and The piston stroke is 3.31 inches. The ratio of Compression is 19.2:1. At 2,600 rpm, The 3TNV82A engine had a gross output power of 26.8 PS (19.7 kW; 26.4 HP) And a maximum torque of 69.6 Nm (7.1 km; 51.3 ft-lb).
The JD 2520 has power steering, wet disc brakes, an open operator station with two-post ROPS, and a fuel tank that holds 27.0 liters (7.1 US gal; 5.9 Imp. gal).
John Deere 2520 Price
Original Price: $11,000 USD
John Deere 2520 Horsepower
The John Deere 2520 engine produces a 54.45 hp and 40.6 kW
John Deere 2520 Weight
Weight: 1865 lbs 845 kg
John Deere 2520 Oil Capacity
Oil capacity: 3.8 qts 3.6 L
John Deere 2520 Key Fact
- 19.4 kW (26.4 hp) Yanmar engine with liquid cooling; weighs 846 kg (1,865 lb.)
- Drive-over mower decks of 157.5 cm (62 in.) and 183 cm (72 in.)
- Standard folding ROPS and cruise control
John Deere 2520 Serial Number
| 1969: | 17000 |
| 1970: | 19416 |
| 1971: | 22000 |
| 1972: | 22915 |
| Final: | 23865 |
John Deere 2520 Specs
ENGINE
| Engine Model | Yanmar 3TNV82A |
| Engine Type | 4-cycle vertical in-line 3-cylinder direct injection liquid-cooled diesel |
| Number of Cylinders | 3 |
| Displacement, cu in (L) | 81.2 (1.33) |
| Engine Bore, in (mm) | 3.23 (82.0) |
| Engine Stroke, in (mm) | 3.31 (84.0) |
| Aspiration | Naturally aspirated |
| Maximum Engine Power, hp (kW) | 26.4 (19.7) |
| Rated Engine Speed, rpm | 2600 |
| Low Idle Speed, rpm | 1500 |
| High Idle Speed, rpm | 3180 |
| Compression Ratio | 19.2:1 |
| Firing Order | 1-3-2 |
| Fuel System | Direct injection |
| Fuel Filter | Replaceable element |
| Fuel Injection Pump | Mechanical, in-line type |
| Lubrication System | Forced lubrication with trochoid pump |
| Oil Filter Type | Single element |
| Air Cleaner | Dual dry element |
| Fuel Tank Capacity, gal (L) | 7.1 (27.0) |
| Oil Capacity, qts (L) | 3.8 (3.6) |
| Coolant Capacity, qts (L) | 4.1 (3.9) |
| Electrical System Rating, Volts | 12 |
| Charging System | Alternator |
| Alternator Rating, Amps | 20 |
POWER TAKE-OFF
| PTO Operational Type | Independent |
| PTO Horsepower, hp (kW) | 20.5 (15.3) |
| Rear PTO Speed, rpm | 540 |
| Rear PTO / Engine Speed, rpm | 540/2600 |
| Mid PTO Speed, rpm | 2100 |
| Mid PTO / Engine Speed, rpm | 2100/3000 |
TRANSMISSION
| Transmission Type | Hydrostatic |
| Number of Forwarding Gears | Infinite (2-range) |
| Number of Reverse Gears | Infinite (2-range) |
| Oil Capacity, qts (L) | 15.4 (14.6) |
| Maximum Forward Speed (Low Range), mph (kph) | 4.5 (7.2) |
| Maximum Forward Speed (High Range), mph (kph) | 13.4 (21.5) |
| Maximum Reverse Speed (Low Range), mph (kph) | 4.5 (7.2) |
| Maximum Reverse Speed (High Range), mph (kph) | 13.0 (20.9) |
WHEELS AND TIRES
| Drive Wheels | 4WD 4×4 |
| Steering Configuration | Front steer |
| Steering System | Power Steering |
| Brakes Type | Wet disc |
| Front Tire Size (Turf) | 24×8.5-14 |
| Rear Tire Size (Turf) | 36×14.00-15 |
| Front Tire Size (Industrial) | 23×8.50-14 |
| Rear Tire Size (Industrial) | 14-17.5 |
| Front Tread, in (mm) | 32.7 (830) |
| Rear Tread, in (mm) | 37.6 (950) |
HYDRAULIC SYSTEM
| Hydraulic System Type | Open center |
| Implement Pump Type | Gear |
| Implement Pump Flow, gpm (Lpm) | 5.0 (19.0) |
| Steering Pump Flow, gpm (Lpm) | 5.5 (20.9) |
| Hydraulic Pressure, Bar (psi) | 167 (2420) |
| Hydraulic Fluid Capacity, gal (L) | 3.9 (14.7) |
| Number of Standard Remote Valves | 2 |
| 3-Point Hitch Category | 1 |
| Draft Sensing or Lift Control | Position control |
| Lift Capacity at 24″ (610mm) behind pin, lb (kg) | 520 (1150) |
| Lift Capacity at pin, lb (kg) | 1435 (650) |
DIMENSIONS AND WEIGHT
| Wheelbase, in (mm) | 65.2 (1650) |
| Overall Length, in (mm) | 108.9 (2760) |
| Height (Hood), in (mm) | 47.2 (1190) |
| Height (ROPS), in (mm) | 89.7 (2270) |
| Overall Width, in (mm) | 52.6 (1330) |
| Ground Clearance, in (mm) | 12.5 (310) |
| Turning Radius (w/o Brakes), in (mm) | 98.4 (2500) |
| Weight, lb (kg) | 1865 (845) |
FRONT END LOADER
| Loader Model | John Deere 200CX |
| Maximum Lift Height at Pin, in (mm) | 78.5 (1990) |
| Clearance with Dumped Bucket, in (mm) | 72.2 (1830) |
| Reach at Maximum Height, in (mm) | 29.5 (740) |
| Maximum Dump Angle, deg | 38 |
| Maximum Rollback Angle, deg | 25 |
| Lift Capacity to Max Height at Pin, lbs (kg) | 902 (410) |
| Lift Capacity to Max Height at 19.7″ (0.5m) Ahead of Pin, lbs (kg) | 630 (285) |
| Breakout Force at Pivot Pin, lbs (kg) | 2240 (1015) |
| Breakout Force at 19.7″ (0.5m) Ahead of Pin, lbs (kg) | 1515 (687) |
| Bucket Width, in (mm) | 53 (1345) |
62″ MOWER DECK
| Mower Deck Model | John Deere 62D2 |
| Mower Deck Type | Mid-mount |
| Number of Blades | 3 |
| Cutting Width, in (mm) | 62 (1570) |
| Overall Width, in (mm) | 75.3 (1910) |
| Cutting Height, in (mm) | 1.0-6.0 (25-152) |
| Lift System | Hydraulic |
| Weight, lb (kg) | 275 (124) |
72″ MOWER DECK
| Mower Deck Model | John Deere 72 |
| Mower Deck Type | Mid-mount |
| Number of Blades | 3 |
| Cutting Width, in (mm) | 72 (1820) |
| Overall Width, in (mm) | 85 (2150) |
| Cutting Height, in (mm) | 1.0-9.0 (25-228) |
| Lift System | Hydraulic |
| Weight, lb (kg) | 406 (184) |
John Deere 2520 Review
The John Deere 2520 is a small but strong tractor that’s famous for being able to do many different jobs, being dependable, and working well. It’s a top choice for farmers, ranchers, and landowners who need a tractor that can do things like cutting grass, plowing, moving things, and light farming.
The 2520 gets its power from a 26.5-horsepower Yanmar diesel engine that’s strong enough for most tasks. It also has four-wheel drive to help it grip well on all kinds of terrain.
You can get the 2520 with different extras, like a front loader, backhoe, and power take-off (PTO) shaft. You can also attach tools to it, like mowers, plows, and cultivators.
For more details check out the YouTube video
John Deere 2520 Attachments
48 Loader |
|
| Loader weight: | 1220 lbs 553 kg |
| Height (to pin): | 126 inches 320 cm |
| Clearance, dumped bucket: | 104 inches 264 cm |
| Dump reach: | 26 inches 66 cm |
| Dump angle: | 39° |
| Reach at ground: | 68 inches 172 cm |
| Breakout force (lift): | 3600 lbs 1632 kg |
| Lift to full height (at pin): | 2400 lbs 1088 kg |
| Bucket width: | 60 inches 152 cm |
| 72 inches 182 cm |
|
148 Loader |
|
| Loader weight: | 1350 lbs 612 kg |
| Height (to pin): | 126 inches 320 cm |
| Clearance, dumped bucket: | 102 inches 259 cm |
| Dump reach: | 32 inches 81 cm |
| Dump angle: | 38° |
| Clearance, level bucket: | 121 inches 307 cm |
| Rollback angle: | 11° |
| Breakout force (lift): | 4700 lbs 2131 kg |
| Lift to full height (at pin): | 3100 lbs 1406 kg |
| Bucket capacity: | 0.5 cu yd 0.4 cu m |
| 0.6 cu yd 0.5 cu m |
|
| 0.8 cu yd 0.6 cu m |
|
| 0.9 cu yd 0.7 cu m |
|
| Bucket width: | 60 inches 152 cm |
| 72 inches 182 cm |
|
| 84 inches 213 cm |
|
| 96 inches 243 cm |
|
John Deere 2520 Problems
- Issues with the Engine
- Hydrostatic Transmission Issues
- Troubles with Hydraulics
- Problems with the Steering System
- Electrical Issues
Final Words
This thorough manual covers every feature of the John Deere 2520, Such as its Price, details, evaluations, Attachments, and Features. You will fully Comprehend this tractor type and its potential after Reading this.
But, If you have any queries concerning this Article, Please Express them in the Comments section below. I’ll try my best to assist you as quickly as possible. Thank’s. Visit our Website at Commercialvehicleinfo.com for additional Details.
John Deere 2520 FAQ
How much horsepower does a John Deere 2520?
John Deere 2520 engine produces a 26.4 hp 19.7 kW
What does a JD 2520 weigh?
John Deere 2520 weight is 846 kg (1,865 lb.)
How much oil does a John Deere 2520 take?
(3) quarts of 15W40 John Deere Plus 50 II engine oil
How much can a John Deere 2520 Lift?
John Deere 2520 lift capacity is 800 lb
What oil does a John Deere 2520 take?
John Deere 2520 take TY26673 15W-40 Oil
How wide is a John Deere 2520?
John Deere 2520 Wheelbase is 65.2 inches 165 cm