John Deere 2040 Specs, Price, Horsepower, Weight, Oil Capacity, Problems, & review
You’ve come to the right place if you’re looking for detail about the John Deere 2040, Such as its features, price, weight, and specs. Through discussions with other John Deere Reps and Colleagues, Our team confirms this information.
The John Deere 2040 availability and comparison to other models will be the Main topics of this debate. Online information search might be challenging.
Our staff compiles thorough details about the John Deere 2040, Including a step-by-step guide, To aid in your search. Let’s go into the subject.
Read also
- john deere d110
- how much does a john deere tractor cost
- john deere 2025r specs
- john deere d130
- john deere d125 price
John Deere 2040 Price
John Deere 2040 Price
Original Price: $14,000
John Deere 2040 Serial Numbers
- 1976: 179963
- 1977: 221555
- 1978: 266057
- 1979: 304165
- 1980: 350000
- 1981: 392026
- 1982: 419145
John Deere 2040 Specification
| Make | John Deere |
| Model | 2040 |
| Company Country | United States |
| Production years | From 1979 Until 1987 |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Price | – |
| Total build | – |
| Engine size | 239.2 ci or 3.9 L |
| Number of cylinders | 4 cylinders |
| Horsepower | 70 hp or 52.2 kW |
| Power RPM | 2500 (rpm) |
| Engine torque | – |
| Engine torque RPM | – |
| Fuel type | diesel |
| Fuel tank capacity | 25.1 gal or 95.0 L |
| Compression ratio | 16.8:1 |
| Bore stroke | 4.19×4.33 inches or (106 x 110 mm) |
| Oil tank capacity | 9 qts or 8.5 L |
| Coolant tank capacity | 19 qts or 18.0 L |
| Transmission type | partially synchronized |
| Transmission gears | 16 forward and 8 reverse |
| Oil tank capacity | 58.1 qts or 55.0 L |
| Hydraulic system | closed center |
| Pump flow rate | 12.42 gpm or 47.0 lpm |
| Hydraulic tank capacity | 14.5 gal or 54.9 L |
| Hydraulic pressure | 2466 psi or 170.0 bar |
| Hitch control system | – |
| Rear hitch | II |
| Rear hitch lift | 6768 lbs or 3069 kg |
| AG front tires | 7.50-18 |
| AG rear tires | 13.6/12-38 |
| Weight | 6536 lbs or 2964 kg |
| Length | 154.5 inches [392 cm] |
| Width | 81.5 inches [207 cm] |
| Height | 104.7 inches [265 cm] |
| Wheelbase | 90 inches [228 cm] |
| Ground clearance | – |
| Rear tread size | 59.1 to 78.7 inches |
| Front tread size | 53.5 to 79.1 inches |
| Number of batteries | – |
| Battery voltage | 12 V |
| Battery Amps | 55 amps |
| Electric ground force | negative |
| Electric charging system | alternator |
| Electric charging Amps | 55 amps |
| Engine starter volts | 12 V |
| Wheel drive | 4×2 2WD |
| Steering system | power |
| Braking system | hydraulic disc |
| Cabin type | Open operator station |
| PTO claimed power | 61 hp or 45.5 kW |
| PTO engine @RPM | 540@2400 (rpm) |
| PTO clutch system | hydraulic |
| Rear PTO system | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO system | – |
| PTO fuel consumption | – |
John Deere 2040 Overview
A 2WD or 4WD utility tractor from the 2040 series is the John Deere 2040. Between 1976 and 1982, John Deere manufactured this tractor in Mannheim, Baden-Wurttemberg, Germany.
From 1980 to 1982, this second generation’s production was completed. A 2.9 L (179.0 cu in) three-cylinder diesel engine and a partially synchronized transmission with 8 forward and 4 backward gears are included in the JD 2040’s equipment.
The John Deere engine powered the John Deere 2040 utility tractor. This engine is a three-cylinder, natural-aspirated 2.9 L, 2,933 cm2 (179.0 cu in), diesel with the cylinder bore and stroke measurements of 106.0 mm (4.17 inches) and 110.0 mm (4.33 inches), respectively. 16.7:1 is the compression ratio rating.
The JD 2040 has a gasoline tank capacity of 62.5 liters (16.5 US gal; 13.7 Imp. gal), hydraulic wet disc brakes, two-post Roll-Gard ROPS, and power assist steering.
The John Deere 175 loader could be mounted to this tractor.
John Deere 2040 Horsepower
The John Deere 2040 engine produces a 70 hp 52.2 kW
John Deere 2040 Weight
Weight is 4060 to 4800 pounds
John Deere 2040 Oil Capacity
Oil capacity is 9 qts 8.5 L
John Deere 2040 Years Made
The john deere 2040 years made: 1976 and 1982.
John Deere 2040 Problems with Solution
Engine problems:
If the engine cannot start or is operating poor, it may result from a blocked air filter, damaged spark plugs or an issue with the fuel injection.
Solution: Clean and inspect your air filters, then replace the spark plugs, and check the fuel injector for damages.
Hydraulic issues:
If the hydraulic system isn’t working correctly It could be due a lack of fluid levels, malfunctioning hydraulic pump, or blockage in the hydraulic filter.
Solution: Examine the levels of fluid and top it off if necessary examine the pump for damages, and replace the filter in the event that it is required.
Electrical problems:
If There are problems in the electrical system, it could Be because of an unresponsive battery, a malfunctioning alternator, or Damaged wiring.
Solution:
Examine the battery for charge and replace it if needed and inspect the alternator for issues, and check the wiring for indications that wear and tear or damage.
Transmission issues:
If the tractor is experiencing difficulty shifting gears or if the transmission is not shifting it may be due to low levels of fluid or a damaged clutch or a worn out transmission.
Solution:
Examine the levels of fluid and top it off if necessary and inspect the clutch for damages, and then consider having the transmission repaired or replaced if damaged or worn.
Steering problems:
If the tractor is difficult to steer and the steering appears to be unsteady it could be due wear on steering parts or damaged cylinders for the steering.
Solution:
Examine the steering parts for indications that they are worn or damaged.
replace them if necessary, and check the steering cylinder for damages or leaks.
Problems with cooling:
If the tractor is running hot and the motor is hot it could be because of an inoperative radiator, a defective thermostat or clogged cooling lines.
Solution:
Check the radiator for leaks or damage and change the thermostat if needed and clear the cooling lines in order to get rid of any obstructions.
John Deere 2040 Attachment
Some common attachments for the John Deere 2040 include:
- Front-end loader: This attachment allows for easy loading and unloading of materials such as dirt, gravel, and snow.
- Backhoe: A backhoe attachment can be used for digging and excavating tasks.
- Mower deck: A mower deck attachment allows for cutting and maintaining grass and other vegetation.
- Plow: A plow attachment can be used for soil preparation and cultivation.
- Bale spear: This attachment is used for moving and transporting hay bales.
- Cultivator: A cultivator attachment can be used for tilling and planting tasks.
John Deere 2040 Review
The John Deere 2040 is a versatile and reliable utility tractor that was manufactured from 1974 to 1986. Powered by a 4-cylinder diesel engine that produces 40 horsepower, it comes with a 3-speed manual transmission and a choice of 2-wheel drive or 4-wheel drive.
The 2040 is an ideal choice for small farms and ranches, landscapers, contractors, hobbyists, and collectors, thanks to its durability and versatility.
For more details check out the YouTube video
Conclusion
The John Deere 2040 Tractor Price, Specification, Review, Attachments, and Features are all that are mentioned.
However, If you have any issues with this post, Do leave a remark in the space provided below. I’ll do my best to find a quick solution to your issue. Thank’s. Visit our Website at Commercialvehicleinfo.com for additional Details.
John Deere 2040 FAQs
Replace each year, following six cleanings, or as specified. (Interval will vary depending on the conditions of operation.)
The initial oil and filter change is at 100 hours and at least 250 hours. Increase service interval by 50 percent if using Plus-50 oil with an oil filter from John Deere.
3-Cylinder Liquid-Cooled 164.4 ci [2.7 L] Engine
In the case of a traditional reservoir in open circuits, the typical rule is to have a tank with a capacity that is 3 to five times the flow of the pump(s) per minute and an air cushion of 10 percent. In the case of HFD and fire-resistant HFC fluids,, the general norm is 5 to 8 times the flow rate of the pump per minute.
John Deere 2040 Wheelbase is 74.4 inches 188 cm and Width is 63 inches 160 cm
The John Deere 2040 is a mid-sized tractor that was manufactured by John Deere from 1976 to 1982. It is part of the 40 Series of tractors and was designed for use in agricultural, industrial, and commercial settings.
The John Deere 2040 has a 8-speed manual transmission with a hi-lo range selector.
The John Deere 2040 has a maximum speed of approximately 16 miles per hour.
The John Deere 2040 has 8 forward gears and 2 reverse gears.
The John Deere 2040 has a maximum lifting capacity of 2,310 pounds.
The John Deere 2040 has a wheelbase of 84.4 inches.