International Harvester 484 Specs, Weight, Price, Overview, Horsepower, Review & Fuel Tank Capacity
In this article, I’ve gathered details regarding the International Harvester 484 from its official website, which includes the International Harvester 484 Spec’s weight, price, and dimensions.
We believe in providing reliable information to our readers, therefore we prefer to obtain information on the International Harvester 484 from authentic sources.
This article, which has been updated, has all the information you require about the International Harvester 484
International Harvester 484 Overview
The International Harvester 484 is an 84-series 2WD utility tractor. From 1977 to 1982, this tractor was manufactured in Doncaster, England by International Harvester.
The International Harvester 484 is powered by a three-cylinder diesel engine with a displacement of 2.9 L (179.0 cuin) and a syncromesh with dry disc clutch transmission with eight forward and four reverse gears.
International Harvester 484 New Price
International Harvester 484 Price: $11,800 (1984)
International Harvester 484 Weight
International Harvester 484 Operating Weight:
Utility: 2,360 kg (5,203 lbs)
Low-profile: 2,330 kg (5,137 lbs)
International Harvester 484 Horsepower
International Harvester 484 Engine Horsepower: 50. HP
International Harvester 484 Fuel Tank Capacity
International Harvester 484 Fuel Tank Capacity: 75.7 liters (20 US gal.; 16.7 Imp. gal)
International Harvester 484 Serial Number
| Year | Serial Number |
| 1978 | 501 |
| 1979 | 1325 |
| 1980 | 2754 |
| 1981 | 5619 |
| 1982 | unk |
| 1983 | unk |
| 1984 | 9165 |
International Harvester 484 Specifications
General Specifications |
|
| Model | International Harvester 484 |
| Cabin type | Two-post fixed ROPS |
| Fuel tank capacity | 75.7 liters (20 US gal.; 16.7 Imp. gal) |
| Battery | 12V |
| Length | Utility: 3,390 mm (133.5 in) Low-profil: 3,510 mm (138.2 in) |
| Weight (shipping) | Utility: 2,360 kg (5,203 lbs) Low-profil: 2,330 kg (5,137 lbs) |
| Ground clearance | Utility: 400 mm (15.7 in) Low-profil: 270 mm (10.6 in) |
| Wheelbase | Utility: 2,000 mm (78.7 in) Low-profil: 1,980 mm (78 in) |
| Height (steering wheel) | Utility: 1,540 mm (60.6 in) Low-profil: 1,430 mm (56.3 in) |
| Width | Utility: 1,780 mm (70.1 in) Low-profil: 1,990 mm (78.3 in) |
Engine |
|
| Engine model | International Harvester D179 |
| Starter | Electric |
| Fuel type | Diesel |
| Engine type | Four-stroke, liquid-cooled, inline |
| Bore and stroke | 98.0 mm X 129.0 mm (3.86 in X 5.08 in) |
| Oil capacity: | 6.4 L (6.8 US. qt, 5.6 Imp. qt.) |
| Cylinders | 3 |
| Coolant capacity: | 11.4 L (12 US. qt, 10 Imp. qt.) |
| Horsepower | 50.7 PS (37.3 kW; 50.0 HP) at 2,200 rpm |
| Displacement | 2.9 L, 2,933 cm2, (179.0 cu·in) |
Transmission and chassis |
|
| Chassis | 4×2 2WD |
| Transmission model | – |
| Gears | 8 forward and 4 reverse |
| Transmission oil capacity | 34.1 L (9 US. gal, 7.5 Imp. gal.) |
| Steering type | Power |
| Speed | Forward: 26.8 kmh (16.7 mph) Reverse: 8.4 (5.2 mph) |
| Brakes | Independent hydraulic wet disc |
| Transmission type | Syncromesh with dry disc clutch |
Tires |
|
| Rear tires | Ag: 13.6-28 |
| Front tires | Ag: 6.00-16 |
Three-Point Hitch |
|
| Lift capacity (at ends) | 1,405 kg (3,100 lbs) |
| Control type | Position control and draft control |
| Category | II |
PTO (Power take-off shaft) |
|
| Rear PTO speed | 540 rpm |
| Rear PTO type | Independent with hydraulic wet disc clutch |
Hydraulic system |
|
| Valves | 0 to 2 |
| Hydraulic capacity | 34.1 L (9 US. gal, 7.5 Imp. gal.) |
| Total flow | 15.4 gpm (58.3 lpm) |
| Hydraulic type | Open center |
International Harvester 484 Review Video
- Not Available
Conclusion
That was all about the International Harvester 484 Price, Specs, Review, and Key Features, But if you have any queries regarding this post, then please Comment below in the comment Box, We will Solve your Problem as soon as possible. Thanks for Visiting our Sit
FAQs – International Harvester 484
