Bobcat ct2025 Specs
This Post provides the Specifications, weight, price, And measurements for the Bobcat ct2025 Specs gathered from the manufacturer’s Website.
We believe to provide accurate details to our readers and we prefer only Official sources for information. All the details which you want to know about Bobcat ct2025 Specs you can find in this article which is updated.
Bobcat ct2025 Price
Bobcat ct2025 Original Price $20,676
Also, Find Here
Bobcat ct2025 Specifications
General |
|
---|---|
Manufacturer | Bobcat |
Model | CT2025 |
Category | Tractors |
Subcategory | Compact Tractor |
Condition | New |
Stock Number | Call for Availability |
VIN | Hauling Available |
Engine |
|
---|---|
Horsepower | 24.5 hp |
Fuel Tank Capacity | 4.2 gal |
Engine Model | 3A165LWM(H) |
Displacement | 100 in³ |
Emissions Tierepa | Tier 3 |
Number Of Cylinders | 3 |
Gross Hp | 24.5 hp |
Rpm | 2600 |
Fuel Tank | 9 gal |
Emissions Tier Epa | Tier 4 |
Engine Cooling | Liquid |
Engine Fuel | Diesel |
Max Governed Rpm | 2,370 rpm |
Drivetrain |
|
---|---|
Transmission Type | Manual (9×3) |
Brake Type | West Multi Disc |
Max Wheel Tip Speed | 2,985 ft/min |
Tip Speed At22gpm | 3,256 ft/min |
Hydraulics |
|
---|---|
Total Hydraulic Flow | 11.34 gal/min |
Flow Range Max | 28 gal/min |
Flow Range Min | 15 gal/min |
Operational |
|
---|---|
Lift Capacity | 1775 lb 24” behind lift point |
Operating Weight | 2,646 lb |
Travel Speed | 9.46 mph |
Travel Speed Reverse | 6.2 mph |
Point Hitch | Category 1 |
Pt Lift Control Type | Hydraulic Position Control System |
Lift Capacity At Behind Lift Point | 1,631 lb |
Lift Capacitymm Ahead Of Bkt Pivot | 1,389 lb |
Rear Pto System | Live |
Rear Pto Rpm | 540 |
Pto Hp | 22.2 hp |
Mid Pto Rpm | 1976 |
Arm Digging Force | 1,248 lbf |
Auxilliary High Flow | 36.6 gal/min |
Auxilliary Pressure | 3,000 psi |
Auxilliary Standard Flow | 23 gal/min |
Boom Swing Left | 67° |
Boom Swing Right | 64° |
Bucket Diggin Force | 1,865 lbf |
Cargo Box Bed Load Capacity | 2000 lb |
Cargo Box Bed Load Height | 38.2 in |
Cargo Box Height | 10 in |
Cargo Box Length | 56 in |
Cargo Box Maximum Load | 2000 lb |
Cargo Box Volume | 18 ft³ |
Cargo Box Width | 51 in |
Dig Depth | 48 in |
Dig Depth Without Extensions | 72 in |
Dig Force Bucket | 4,878 lbf |
Dig Force Dipper | 3,291 lbf |
Dig Width | 914.4 mm |
Ground Clearance | 9.2 in |
Height To Bucket Hinge Pin | 132 in |
Lift Radius | 118 in |
Machine Rated Capacity | 2200 lb |
Max Dig Depth | 6 ft |
Max Dump Height | 6 ft |
Max Reach At Ground Level | 10.2 ft |
Max Travel Speed | 17 mph |
Maximum Dig Depth | 72 in |
Operating Weight Less Bit | 454 lb |
Operating Weight V | 1113 lb |
Operating Weight With Teeth V | 1,177 lb |
Operating Weight Withfrontgate | 2,367 lb |
Operating Weight Without Teeth V | 1,213 lb |
Operating Weightwith Pinon Mount | 876 lb |
Operating Weightwith X Change Mount | 881 lb |
Outside Turning Diameter | 210 in |
Power Take Off Horsepower | 25 hp |
Rated Lift Capacity | 527 lb |
Rated Operating Capacity Sae | 3,325 lb |
Reach At Maximum Height | 31.5 in |
Rear Power Take Off System | 540 |
System Relief At Quick Couplers | 3,500 psi |
Three Point Hitch | Category 1 |
Tipping Load | 6650 lb |
Total Vehicle Rated Capacity | 4200 lb |
Travel Speed High | 1.7 mph |
Travel Speed Low | 8 mph |
Travel Speed Two Speed Option | 12.3 mph |
Turning Radius | 85.8 in |
Turning Radius All Wheel Steer Mode | 151.5 in |
Measurements |
|
---|---|
Length | 120.9 in |
Height | 91.5 in |
Width | 64 in |
Wheelbase | 5′ 5″ |
Turning Radius | 8′ 0″ |
Ground Clearance | 11.5 in |
Front Tire Size | Front AG.(Turf, Industrial) 7-16 (28 X 8.5-15/6, 27X8.5-15) |
Rear Tire Size | Rear AG.(Turf, Industrial) 11.2-24 (41 X 14-20/4, 15-19.5) |
Loader Lift Height | 7′ 10″ |
Bucket Width | 5′ 0″ |
Bobcat CT2025 Features & Benefits
Power Take-Off (PTO) Till your garden and plant a spring food plot. | Roll Over Protective Structure (ROPS). |
Three-Point Hitch. | Maximum Maneuverability. |
Three Tire Options. | Four-Wheel Drive. |
Leading Lift Capacity. | Manual-Shift Transmission. |
Bobcat ct2025 Problems
Problem: The tractor fails to start or has difficulty starting.
Solution: Check the battery for proper charge and clean the terminals. Ensure the fuel reaches the engine and that the glow plugs are functioning correctly. If the issue persists, consult a qualified technician for further diagnosis.
Problem: Issues with the tractor’s hydraulic system, such as slow or unresponsive hydraulics.
Solution: Check the hydraulic fluid levels and ensure there are no leaks. Inspect the hydraulic filters and replace them if needed. If the problem continues, have a qualified technician inspect the hydraulic system for any malfunctioning components.
Problem: The tractor’s engine overheats.
Solution: Inspect the radiator for debris or blockages and clean it if necessary. Ensure the cooling fan is operating correctly. Check the coolant levels and circulation. If the problem persists, have the cooling system inspected by a professional.
Problem: Transmission slipping or difficulty shifting gears.
Solution: Verify the transmission fluid levels and condition. If the fluid is low or contaminated, drain and refill with the correct fluid. Inspect the clutch and linkage for damage or wear. If the Problem Persists, seek assistance from a Professional Technician.
Problem: Electrical issues, such as faulty lights or intermittent electrical connections.
Solution: Inspect the wiring harness for loose or damaged connections. Check the fuses and replace any blown fuses. Ensure the battery connections are clean and secure. If the problem continues, consult an electrician or authorized Bobcat service center.
Problem: Belts slipping or failing to operate properly.
Solution: Check the condition and tension of the belts. Adjust or replace them as necessary. Ensure proper alignment of the pulleys. If the issue persists, consult a technician for further inspection and potential belt replacement.
Problem: Difficulty in steering or loss of steering control.
Solution: Check the power steering fluid levels and top up if needed. Inspect the steering linkage for damage or wear. Ensure the steering components are properly lubricated. If the Problem Persists, seek assistance from a Professional Technician.
Problem: Power Take-Off (PTO) not engaging or disengaging properly.
Solution: Inspect the PTO clutch for wear or damage. Check the PTO switch and wiring for faults. Ensure the PTO shaft is adequately lubricated. If the issue persists, consult a technician for further diagnosis and repair.
Bobcat CT2025 Attachments
Tiller | Finish Mower |
Front End Loader Arms | Mid-Mount Mower |
Backhoe | Angle Blade |
Bobcat ct2025 Review
The Bobcat CT2025 is a small tractor highly regarded for its versatility, strong performance, and rugged build. It’s a favored option among farmers, ranchers, and professionals who require a powerful and dependable machine for various tasks like mowing, landscaping, and snow removal.
For more details check out the Youtube video
Final Words
I hope you found all the information you were looking for online. Furthermore, I hope you enjoyed reading the Bobcat ct2025 article. If you have any questions or concerns, you are welcome to comment in the comment box.
I will get back to you as quickly as I can. Thank you for your time I hope you will stay with me for more posts similar to this. Thank’s. Visit our Website at Commercialvehicleinfo.com for additional Details.
Bobcat ct2025 FAQ
The Bobcat CT2025 tractor has a horsepower rating of 24.8.
Is the CT2025 tractor a compact or sub-compact model?
The Bobcat CT2025 is a compact tractor, designed for versatile operation in various applications.
Yes, the Bobcat CT2025 tractor is compatible with various attachments such as loaders, mowers, and backhoes.
The maximum lifting capacity of the Bobcat CT2025 tractor varies depending on the specific loader attachment used.
Yes, the Bobcat CT2025 tractor is equipped with four-wheel drive (4WD) for enhanced traction and stability.
The operating weight of the Bobcat CT2025 tractor is approximately 2,400 to 2,600 pounds (1,090 to 1,180 kilograms), depending on the configuration and attachments.
Yes, the Bobcat CT2025 tractor features a hydrostatic transmission, providing smooth and easy speed control.
The Bobcat CT2025 tractor has a three-range hydrostatic transmission with infinite speed control within each range.
Yes, the Bobcat CT2025 tractor is suitable for landscaping tasks such as mowing, tilling, and hauling with the right attachments.
The fuel tank capacity of the Bobcat CT2025 tractor is approximately 6.4 gallons (24.2 liters).
Regular maintenance tasks such as oil changes, filter replacements, and inspections should be performed as per the recommended intervals outlined in the owner’s manual.
The Bobcat CT2025 tractor typically comes with agricultural tires suitable for various terrains.
Yes, the Bobcat CT2025 tractor can be equipped with a loader attachment for tasks such as material handling and digging.
Yes, the Bobcat CT2025 tractor is equipped with power steering, providing ease of maneuverability.
The Bobcat CT2025 tractor is equipped with safety features such as a Rollover Protective Structure (ROPS) and seat belts to ensure operator safety.