Allis Chalmers 5030 Specs, Weight, Price & Review
If you’re searching for Allis Chalmers 530 Specs price, reviews, Weight, and features, you’ve come to the right place.
Our commercialvehicleinfo team has confirmed this information with several Case associates and agents. Let’s discuss Allis Chalmers 530 Specs, price and reviews.
It can be challenging to find complete information online. We recommend that you save your valuable time and energy.
Our commercialvehicleinfo team has compiled complete and step-by-step information on Allis Chalmers 530 Specs price and reviews, Weight, and features to make your search easier.
About Allis Chalmers 5030 Specs
The Allis Chalmers 5030 is a compact two-wheel utility tractor manufactured by Japanese company Hinomoto at their facility located in Osaka, Japan for Allis Chalmers from 1979 until 1985.
The tractor is an identical model as Simplicity 9528. It is the Allis Chalmers 5030 comes with two-cylinder, liquid-cooled Toyosha diesel engine,
which has 1.5 L 1,477 cc (90.1 cubic inches) of displacement, and sliding gear transmission, with three reverse and 12 forward gears (four forward gears as well as reverse with low, high and creeper gears).
It was the Allis Chalmers 5030 utility tractor that employed a two-cylinder liquid-cooled naturally-aspirated Toyosha S148 diesel engine that had 97.0 millimetres (3.82 inches) of the bore in the cylinder and 100.0 millimetres (3.94 inches) of the piston stroke.
The compression ratio is 23:1. It generated 28.0 HP (20.9 kW) of maximum horsepower or 26.0 HP (19.4 kW) on the PTO-shaft. The engine utilized Donaldson Dry air cleaner.
Allis Chalmers 5030 Price
1980 Allis Chalmers 5030 $6,500
Allis Chalmers 5030 Weight
Operated: 1,147 kg (2,530 lb.)
Allis Chalmers 5030 Engine oil capacity
27.0 L (7.0 Gal.)
Allis Chalmers 5030 Model
1979 – 1985
Allis Chalmers 5030 Specs
General Specifications
| Model | Allis Chalmers 5030 |
| Length | 2,550 mm (100.4 in.) |
| Width | 1,360 mm (53.5 in.) |
| Height | Exhaust Stack: 2,080 mm (81.9 in.) Hood: 1,140 mm (45.1 in.) Steering Wheel: 1,360 mm (53.7 in.) |
| Wheelbase | 1,560 mm (61.8 in.) |
| Ground clearance | 360-390 mm (14.5-15.6 in.) |
| Weight | Operated: 1,147 kg (2,530 lb.) Ballasted: 1,758 kg (3,876 lb.) |
| Fuel tank capacity | 27.0 L (7.0 Gal.) |
| Battery | 12V – 70A |
Engine
| Engine model | Toyosha S148 |
| Fuel | Diesel |
| Displacement | 1.5 L, 1,477 L (90.1 cu.in.) |
| Bore x stroke | 97.0 x 100.0 mm (3.82 x 3.92 in) |
| Power output | 28.0 HP (20.9 kW) |
| Torque | – |
| Starter type | Electric starter Hitachi S13-31 |
| Oil type | – |
| Oil Capacity | 4.0-4.7 L (4.2-5.0 qt.) |
| Coolant capacity | 5.0 L (5.3 qt.) |
Tires size
| Front tires | Ag: 5.0×15 Turf / Lawn: 20×8.0-10 |
| Rear tires | Ag: 12.4×24 Turf: 13.6×16, 20×8.00-10 |
Transmission and chassis
| Chassis | 4×2 2WD |
| Steering | Mechanical |
| Transmission type | Sliding gear |
| Gears | 12 forward and 3 reverse |
| Ground speed | Forward: up to 20.9 km/h (13.0 mph) Reverse: up to 14.8 km/h (9.2 mph) |
| Transmission oil capacity | 25.5 L (6.7 Gal) |
PTO (Power take-off shaft)
| PTO Type: | Rear, transmission PTO |
| PTO Speed: | 540 rpm |
Hydraulic lift
| 3-point linkage | Category I |
| Control system | – |
| No. of remote valves | 1 |
| Max lifting capacity (at link end) | – |
Hydraulic system
| Type | Open center |
| Pump flow | 20.6 l/m (5.44 GPM) |
| Oil Capacity | 25.5 L (6.7 Gal) |
Allis Chalmers 5030 Attachments
Allis Chalmers 430 Loader
| Loader weight: | 552 lbs 250 kg |
| Height (to pin): | 91 inches 231 cm |
| Dump reach: | 18 inches 45 cm |
| Dump angle: | 45° |
| Clearance, level bucket: | 77 inches 195 cm |
| Rollback angle: | 15° |
| Breakout force (lift): | 920 lbs 417 kg |
| Lift to full height (at pin): | 720 lbs 326 kg |
| Bucket width: | 48 inches 121 cm |
Allis Chalmers 5030 Specs Review
Conclusion
That’s everything you need to know about the Allis Chalmers 5030 review, attachments, and features of the Allis Chalmers 5030
But if you have questions about this post, please leave a comment in the box below. I’ll do my best to help you as soon as I can. Thanks. For more information visit our website: Commercialvehicleinfo.com