Kubota and Yanmar are two renowned and esteemed brands in agricultural machinery and construction equipment. Both offer a comprehensive selection of tractors, engines, and excavators to meet farmers’ and contractors’ demands.
While these brands share some similarities, there are important distinctions that can affect performance, efficiency, and value.
In this article, we’ll compare Kubota versus Yanmar by looking at their tractors, engines, and excavators to determine which may be the best fit for your specific requirements.
About Kubota vs Yanmar
Both Yanmar and Kubota are Japanese enterprises that started in the early twentieth century. Yanmar was founded in 1912 and initially manufactured gas engines.
It quickly changed its focus, however, to diesel engines, which proved to be more efficient and robust.
Yanmar company is today a major producer of diesel engines, as well as tractors, excavators, and other heavy equipment.
Kubota, on the other hand, was founded in 1890 and began manufacturing iron pipes.
It later entered the agricultural machinery sector, producing tractors in 1960. Kubota is presently among the foremost producers of engines, excavators, and tractors globally, with a widespread reach spanning 110 countries.
Kubota vs Yanmar Tractors
Tractors are necessary for any farmer or rancher who must plow, till, or cultivate their property. Yanmar and Kubota both manufacture a large range of tractors ideal for a variety of applications.
Kubota tractors
Kubota has a wide range of tractors ideal for modest to large-scale farms. Compact tractors are popular among amateur farmers and landscapers, while larger tractors are great for commercial farmers and ranchers. Kubota tractors are well-known for their toughness, dependability, and versatility.
The MX4900 is a 13.5-gallon (51-liter) diesel tractor with an engine that produces 49.3 horsepower with hydrostatic power steering. The machinery boasts a gearbox of the gear-drive type, which has the ability to be transformed between 2-wheel and 4-wheel drive modes. Additionally, it features a 4-wheel drive HST, i.e., hydrostatic transmission.
The highest Power Take-off (PTO) for this Kubota MX model is 40.5 HP (30.2 kW) for the gear-drive transmission type and 39.0 HP (29.1 kW) for the HST type.
kubota l2501 vs yanmar 424
Here are some technical details that can help you compare the two models:
-
Engine Power: Kubota L2501 has a 24.8 horsepower engine, while Yanmar 424 has a 24 horsepower engine. While the difference in horsepower is minimal, the Kubota engine has a larger displacement, which may result in better torque and pulling power.
-
Transmission: Kubota L2501 has a gear drive transmission with 8 forward and 4 reverse speeds, while Yanmar 424 has a hydrostatic transmission with infinite forward and reverse speeds. Hydrostatic transmissions are generally easier to use, while gear drive transmissions are more durable.
-
Weight: Kubota L2501 weighs around 2,600 pounds, while Yanmar 424 weighs around 1,670 pounds. The heavier weight of the Kubota may make it more stable on uneven terrain, while the lighter weight of the Yanmar may make it more maneuverable.
-
Lift Capacity: Kubota L2501 has a lift capacity of around 1,300 pounds, while Yanmar 424 has a lift capacity of around 1,100 pounds. The higher lift capacity of the Kubota may be useful for tasks that require lifting heavy loads.
-
Fuel Tank Capacity: Kubota L2501 has a fuel tank capacity of 11.1 gallons, while Yanmar 424 has a fuel tank capacity of 6.6 gallons. The larger fuel tank of the Kubota may mean that it can work for longer periods without needing to refuel.
-
Price: The price of Kubota L2501 may vary depending on the dealer, but it generally costs more than Yanmar 424. However, Kubota is known for its reliability and durability, which may make it a better long-term investment.
Overall, both Kubota L2501 and Yanmar 424 are reliable and capable compact tractors.
kubota b2601 vs yanmar sa324
Kubota B2601 and Yanmar SA324 are both subcompact tractors that are suitable for various agricultural tasks. Here are some technical details that can help you compare the two models:
-
Engine Power: Kubota B2601 has a 25.5 horsepower engine, while Yanmar SA324 has a 23.9 horsepower engine. While the difference in horsepower is minimal, the Kubota engine has a larger displacement, which may result in better torque and pulling power.
-
Transmission: Kubota B2601 has a hydrostatic transmission with 3 range speeds, while Yanmar SA324 has a hydrostatic transmission with 2 range speeds. Both transmissions are easy to use and provide smooth operation.
-
Weight: Kubota B2601 weighs around 1,900 pounds, while Yanmar SA324 weighs around 1,600 pounds. The heavier weight of the Kubota may make it more stable on uneven terrain, while the lighter weight of the Yanmar may make it more maneuverable.
-
Lift Capacity: Kubota B2601 has a lift capacity of around 1,000 pounds, while Yanmar SA324 has a lift capacity of around 1,200 pounds. The higher lift capacity of the Yanmar may be useful for tasks that require lifting heavy loads.
-
Fuel Tank Capacity: Kubota B2601 has a fuel tank capacity of 7.9 gallons, while Yanmar SA324 has a fuel tank capacity of 6.6 gallons. The larger fuel tank of the Kubota may mean that it can work for longer periods without needing to refuel.
-
Price: The price of Kubota B2601 may vary depending on the dealer, but it generally costs more than Yanmar SA324. However, Kubota is known for its reliability and durability, which may make it a better long-term investment.
Overall, both Kubota B2601 and Yanmar SA324 are reliable and capable subcompact tractors.
where is the Kubota tractor made?
Today, Georgia produces or assembles more than half of all Kubota equipment marketed in the United States. Two Georgia-based plants combine approximately 600,000 square feet and employ approximately 1,200 Americans.
Kubota Manufacturing Plants of America (KMA) is based in Gainesville, Georgia, about 90 miles northeast of Atlanta. For the past three decades, KMA has acted as Kubota’s North American manufacturing base.
Yanmar tractors
Yanmar has a variety of tractors appropriate for small to medium-sized farms. Its tiny tractors are particularly popular among hobby farmers and landscapers who require versatile equipment capable of handling a wide range of activities. Yanmar tractors are well-known for their fuel efficiency, mobility, and user-friendliness.
The YT347C is a 12.7-gallon (48-liter) diesel tractor with a 46-hp engine and completely hydraulic power steering. The drivetrain for this machine is configurable between a 2-wheel drive or 4-wheel drive with three selectable speeds.
The apparatus can deliver a Power Take-off (PTO) of up to 39.5 HP (29.1 kW) when functioning at its maximum speed, and 36.4 HP (26.8 kW) when it’s stationary, with a 2800 RPM rating. Yanmar’s high-performance 4TNV88C Tier 4 4-cylinder engine powers the YT347C.
According to the aforementioned specifications of two of the most recent models from both tractor manufacturers, the Kubota tractor wins in terms of fuel capacity, engine horsepower, and PTO.
who makes Yanmar tractors?
Yanmar manufactured two tractors. One for the US and one for Japan and others. They did this to suit country-specific standards. In Japan, rice fields employ them with tillers. Tillers use these tractors’ multispeed PTOs. They set up US tractors for mowers, blades, etc. because there are few rice fields to till. OSHA and other safety rules applied to US market tractors.
Kubota vs Yanmar Tractor’s price comparison
Yanmar tractors are generally less expensive than Kubota tractors in terms of price. The correct price difference, however, will depend on the specific model and features. When deciding between Yanmar and Kubota tractors, it’s critical to consider not only the upfront cost but also the long-term maintenance and repair expenditures.
If You want to check for the correct price comparison check here. kubota tractors price list USA and Yanmar tractors price list USA.
Kubota vs Yanmar Engines
There are various aspects to consider while deciding between Yanmar and Kubota engines. Yanmar engines are noted for their low emissions and fuel efficiency, whilst Kubota engines are known for their power and torque.
Finally, the choice between Yanmar and Kubota engines will be determined by your unique requirements and preferences.
Kubota engines
Kubota manufactures a variety of diesel engines for a variety of uses. Its engines are known for their power and torque making them perfect for heavy machinery.
Kubota engines are also well-known for their dependability and longevity, with many engines lasting decades.
Kubota makes powerful 6-cylinder diesel engines. The firm has produced commercial and industrial diesel engines for over 100 years.
Kubota’s multi-cylinder engines are compact, liquid-cooled, and emit less than competitors’ engines.
Where is Kubota manufactured? The US engine division (Kubota Engine of America) is currently situated in Illinois, while the US tractor division (Kubota Manufacturing of America) is based in Georgia.
The Kubota sites in the United States provide sales and technical assistance to the constantly increasing diesel engine market.
Yanmar engines
Yanmar manufactures a variety of diesel engines for a variety of uses. Its engines are environmentally beneficial due to their minimal emissions and good fuel efficiency.
Yanmar engines are also well-known for their dependability and longevity, with many engines lasting decades.
Yanmar offers diesel engines with up to four cylinders that are ideal for a variety of industries including agriculture, construction, and power generating.
The company’s headquarters are in Japan, from whence it ships engines to customers all over the world.
Kubota vs Yanmar excavators
When selecting between Yanmar and Kubota excavators, there are several factors to take into account. Yanmar excavators are known for their precision and ease of use; Kubota excavators boast versatility and ease of maintenance.
Ultimately, the decision between Yanmar or Kubota excavators will depend on your individual needs and preferences.
Kubota excavators are 0.8 to 8.2 tons with great engine performance and durability. 0.8–10-ton Yanmar excavators.
Yanmar and Kubota’s excavators have low emissions and excellent fuel economy for traditional swing and zero-turn action.
Kubota excavators
Kubota manufactures a variety of excavators for a variety of uses. The excavators are renowned for their sturdiness, adaptability, and low maintenance, rendering them a perfect fit for deployment across construction, mining, and other demanding industrial sectors.
Kubota excavators are also well-known for their dependability and endurance, with many models lasting decades.
Yanmar excavators
Yanmar manufactures a variety of excavators for a variety of uses. The excavators are recognized for their durability, accuracy, and user-friendliness, making them a suitable option for high-stress industries such as construction and mining.
Yanmar excavators are also well-known for their dependability and endurance, with many models lasting decades.
Kubota vs Yanmar Harvester
Kubota and Yanmar are two popular brands of harvesters, both of which have their own unique features and capabilities. Here are some technical details that can help you compare the two brands:
-
Engine Power: Kubota harvesters typically have engines ranging from 50 to 97 horsepower, while Yanmar harvesters generally have engines ranging from 65 to 114 horsepower. This means that Yanmar harvesters may have slightly more power and may be able to handle larger loads.
-
Fuel Consumption: Kubota harvesters are known for their fuel efficiency, with some models using as little as 2.5 liters of diesel per hour. Yanmar harvesters also have good fuel efficiency, but they may use slightly more fuel than Kubota harvesters.
-
Cutting Width: Kubota harvesters have cutting widths that range from 1.5 to 2.7 meters, while Yanmar harvesters have cutting widths that range from 1.6 to 2.8 meters. This means that both brands have similar cutting widths, although Yanmar harvesters may be slightly wider.
-
Threshing Mechanism: Kubota harvesters typically use a rasp bar threshing mechanism, while Yanmar harvesters use an axial flow threshing mechanism. Axial flow threshing is generally considered to be more efficient and may result in less grain loss.
-
Harvesting Capacity: Kubota harvesters can typically harvest between 0.8 and 1.6 hectares per day, while Yanmar harvesters can harvest between 1 and 1.8 hectares per day. This means that Yanmar harvesters may have a higher harvesting capacity and be able to complete jobs more quickly.
Overall, both Kubota and Yanmar harvesters are reliable and efficient machines. The choice between the two brands may come down to personal preference, as well as the specific features and capabilities of each model.
Related Searches,
Conclusion
Yanmar and Kubota are both well-known for manufacturing high-quality tractors, engines, and excavators that are dependable, efficient, and long-lasting. It is critical to examine your specific demands and preferences while deciding between the two.
Yanmar product is well-known for their fuel economy, precision, and low emissions, whereas Kubota is well-known for their power, versatility, and ease of maintenance. Finally, the choice between Yanmar and Kubota will be determined by your individual needs and applications.