The Cub Cadet GT2542 is a two-wheel garden tractor that is part of the 2500 Series. The tractor was produced through Cub Cadet (a part of MTD) from 2006 until 2010.
It was manufactured from 2006 to 2010. Cub Cadet GT2542 is equipped with an 0.6 L (38.1 cu*in) two-cylinder gasoline engine as well as a hydrostatic transmission that has infinite reverse and forward gears.
It was a Cub Cadet GT2542 garden tractor that utilized an engine from Kohler Command. It’s an 0.6 L 624 cm 2, (38.1 cu*in) two-cylinder natural aspirated gasoline engine that has 77.0 millimeters (3.03 inches) of bore diameter and 67.0 millimeters (2.64 inches) of the stroke of the piston.
The compression ratio is 8.5:1. The engine generated 20.1 PS (14.9 kW; 20.0 HP) at 3,600 rpm.
The Cub Cadet GT2542 comes equipped with a manual steering system and dry disc brakes. It also has an open operator station and 8.5 Liters (2.2 US gal.; 1.9 Imp. gal) fuel tank.
You May Like It
- jcb price in india
- kubota l2501 specs
- ls tractor prices
- fendt tractor price in india
- yanmar tractor price
Cub Cadet gt2542 Price
NA
Cub Cadet gt2542 Specification
General Specifications |
|
| Model | Cub Cadet GT 2542 |
| Length | 1,820 mm (71.7 in) |
| Width | 990 mm (39 in) |
| Height | 1,060 mm (41.7 in) |
| Wheelbase | 1,190 mm (46.9 in) |
| Ground clearance | 150 mm (5.9 in) |
| Weight | 335 kg (739 lbs) |
| Fuel tank capacity | 8.5 liters (2.2 US gal.; 1.9 Imp. gal) |
| Battery | 12V, CCA 275A |
| Cabin type | Open operator station |
Engine |
|
| Engine model | Kohler Command CH20S |
| Engine type | Four-stroke, air-cooled |
| Cylinders | 2 |
| Fuel type | Gasoline |
| Displacement | 0.6 L, 624 cm2, (38.1 cu·in) |
| Bore and stroke | 77.0 mm X 67.0 mm (3.03 in X 2.64 in) |
| Compression ratio | 8.5:1 |
| Horsepower | 20.1 PS (14.9 kW; 20.0 HP) at 3,600 rpm |
| Starter | Electric |
| Oil capacity: | 1.9 L (2 US. qt, 1.7 Imp. qt.) |
Transmission and chassis |
|
| Chassis | 4×2 2WD |
| Steering type | Manual |
| Brakes | Dry disc |
| Transmission model | Hydro-Gear BDU-10 |
| Transmission type | Hydrostatic |
| Gears | Infinite forward and reverse |
| Speed | Forward: 9.3 kmh (5.8 mph) Reverse: 5.6 kmh (3.5 mph) |
| Transmission oil capacity | 5.4 L (1.4 US. gal, 1.2 Imp. gal.) |
Tires |
|
| Front tires | Ag: 16×6.5-8 |
| Rear tires | Ag: 23×9.5-12 |
Three-Point Hitch |
|
| Category | Sleeve hitch (optional) |
| Control type | – |
| Lift capacity (at ends) | – |
PTO (Power take-off shaft) |
|
| Front PTO type | Independent with electric clutch |
| Front PTO speed | – |
Cub Cadet gt2542 Attachments
- Mid-mount Cub Cadet 42 in (1,060 mm) mower deck with 3-blade and manual spring-assisted lift
- Front-mount Cub Cadet 190-302 42 in (1,060 mm) blade
- Front-mount Cub Cadet 190-341 42 in (1,060 mm) two-stage snow blower
Final Words
That was all about the Cub Cadet gt2542, I hope it is helpful to you, But If you have any queries about this article, then please comment below in the comment box my friends, I will solve your problem as soon as. thanks for visiting our site and stay tuned to me for more stuff like this. Keep Smile.